Edmond Bathroom Remodeling Specialist

Bathroom Remodeling in Edmond, OK

Bathroom remodeling in Edmond, OK costs $8,500 to $25,000+ and takes 4 to 12 working days depending on whether you are replacing a master shower or renovating the entire room. Parsons Custom Bath and Shower delivers studs-out bathroom renovations and custom tile showers across Edmond with certified Schluter waterproofing, clean daily job sites, and zero subcontracted labor.

WaterproofingSchluter Certified
ProcessStuds-Out Build
Verification24-Hr Flood Test
(405) 455-9575
The Engineering Standard

How We Build: The 5-Step Waterproof Shower Process

Most shower leaks in Oklahoma homes happen because contractors cut corners behind the tile. Here is exactly how our builds are engineered from bare framing to ready-for-glass.

01

Studs-Out Tear-Out & 2" DWV Drain Conversion

We strip failing tile, moisture-damaged drywall, or old tub inserts down to bare wood framing and subfloor, inspecting for hidden water rot or mold. Bathtub drains use 1.5-inch lines prone to sluggish pooling. We convert the plumbing below the slab or subfloor to a 2-inch DWV PVC line so high-flow shower fixtures drain instantly.

Plumbing Standard: 2-inch minimum drain diameter for custom walk-in shower pans.
02

Hand-Troweled 1/4" Pre-Slope Mortar Bed

A leakproof shower begins with the pre-slope. We pack a screeded dry-pack mortar bed pitched at 1/4-inch per linear foot toward the integrated bonding flange drain. This guarantees water that reaches the pan drains immediately toward the pipe rather than pooling under tile.

TCNA Standard: ANSI A108.1B dry-pack mortar bed slope requirement.
03

Schluter-KERDI Waterproofing & 24-Hr Flood Test

We seal the shower from subfloor to ceiling using certified Schluter-KERDI bonded membrane and prefabricated waterproof corners. Before setting a single tile, we plug the drain, fill the pan with water, and conduct a mandatory 24-hour flood test to verify zero water drop overnight.

Verification: 24-hour static water test before tile installation begins.
04

TCNA-Compliant Precision Tile Lay & Movement Joints

Tile is installed using laser leveling lines and mechanical tension clips to guarantee flat surfaces without lippage. Per TCNA EJ171 specifications, all inside corners and wall-to-floor plane changes are sealed with 100% color-matched silicone to absorb building movement without cracking grout.

Movement Joints: TCNA EJ171 compliant color-matched silicone on all plane changes.
05

Solid Quartz Curb Caps & Glass-Ready Prep

We never leave grout joints on flat horizontal surfaces where standing water can penetrate. Shower curbs, niche sills, and bench tops are capped with single-piece solid quartz slabs pitched slightly inward. Openings are plumbed and reinforced for heavy frameless glass doors.

Detailing: Seamless solid stone threshold caps eliminating horizontal grout lines.
Zero Franchise Overlays

Ready for an on-site walkthrough?

We inspect your plumbing, measure framing pitch, check subfloor integrity, and provide a transparent, line-item bid with no sales pressure.

The Reality Check

1-Day Acrylic Franchises vs. Handymen vs. OKCBath

Homeowners in Oklahoma City are constantly sold plastic bath liners for $10,000+. Compare the construction standards before you sign any contract.

Construction Standard1-Day Bath FranchiseUninsured HandymanOKCBath / Parsons
Waterproofing Barrier Plastic acrylic overlay glued over old drywall/mold Cement board or greenboard (seeps moisture over time) 100% Schluter-KERDI vapor-impermeable bonded membrane
Shower Pan Foundation Hollow acrylic pan prone to flexing and squeaking Generic vinyl liner or flat un-pitched mortar Pre-sloped dry-pack mortar bed with 1/4" pitch to drain
Plumbing Drain Line Left at narrow 1.5" tub drain (sluggish pooling) Usually left unchanged to cut labor costs Upgraded to 2" DWV high-flow PVC line below subfloor
Water Test Verification None (panels glued and caulked) Rarely tested before tiling Mandatory 24-hour pan flood test before any tile is laid
Curbs & Niche Ledges Plastic trim strips caulked together Cut tiles with vulnerable grout joints on flat ledge Single-piece solid quartz slabs pitched for water runoff
Crew & Accountability Rotating subcontractors paid on piece-rate speed Solo handyman juggling 4 other side jobs Dedicated master tile craftsman on your job site every day
Waterproof Warranty Limited franchise warranty with mold disclaimers Tail-light warranty (gone when the truck leaves) Lifetime Leakproof Warranty with full Schluter system
Local Engineering Alert: Oklahoma Red Clay Soil

Why Oklahoma Concrete Slabs Crack Tile (And How We Stop It)

Oklahoma red clay expands aggressively in wet springs and contracts drastically in dry summers. This movement creates hairline shifting in concrete foundation slabs across Oklahoma City, Edmond, and Yukon. If tile is bonded directly to the slab, it cracks within 2 years. We isolate the foundation with Schluter uncoupling membranes and 100% flexible silicone expansion joints at every plane change per TCNA EJ171 specifications.

Clear Investment Ranges

Custom Shower & Remodeling Investment Packages

Every home is unique, but high-end custom tile remodeling shouldn't be a guessing game. Here are our transparent turnkey ranges covering demolition, plumbing, waterproofing, and tile.

Essential Walk-In Tile Shower

Standard 30"x60" alcove replacements & tub-to-shower conversions

$7,500 – $9,500
Timeline: 4–6 Working Days
  • Full studs-out demolition & rotted framing remediation
  • 2-inch DWV high-flow drain conversion below subfloor
  • Hand-troweled 1/4" per foot pre-slope mortar pan
  • 100% Schluter-KERDI bonded waterproofing membrane
  • Mandatory 24-hour pan flood test before tile setting
  • Subway or large-format porcelain wall tile up to 8 ft
  • Single recessed tile niche & solid quartz curb threshold
  • Frameless glass door templating coordination
Most Popular Scope

Custom Designer Tile Shower

Master bathrooms, expanded footprints & intricate stone tile

$9,500 – $13,500
Timeline: 5–8 Working Days
  • Everything in Essential, plus expanded shower footprint
  • Ceiling-height tile installation with waterproof ceiling wrap
  • Custom double niche or full-width horizontal accent niche
  • Solid quartz bench seating with single-piece stone top
  • Upgraded plumbing: Dual-valve rain head & handheld wand
  • Natural stone, zellige, or herringbone feature wall layout
  • Stain-resistant urethane or epoxy grout installation
  • Lifetime Schluter manufacturer system warranty

Luxury Master Wetroom & Full Bath

Complete studs-out master bath transformations & curbless wetrooms

$15,000 – $25,000+
Timeline: 8–14 Working Days
  • Curbless zero-threshold walk-in entry with integrated linear drain
  • Subfloor recessing & Schluter-DITRA uncoupling membrane
  • Freestanding tub and open wetroom zone integration
  • Large-format porcelain slabs or bookmatched marble tile
  • In-floor radiant heating system (Schluter-DITRA-HEAT)
  • Custom double vanity plumbing rough-ins & electrical coordination
  • Moisture-resistant drywall, fresh paint & finish trim carpentry
  • Turnkey project management with dedicated owner supervision

Edmond Master Suite & Tub Conversions

From Deer Creek to Coffee Creek, we rebuild failing master baths and fiberglass inserts as custom walk-in tile showers. We convert narrow 1.5-inch tub drains to 2-inch DWV high-flow lines and level Oklahoma red clay slab movement before setting tile.

Edmond Master Suite & Tub Conversions
Parsons Custom Bath and Shower — Custom Detail Preview

Schluter Waterproofing & Single-Piece Quartz Sills

Edmond homes require permanent moisture protection. We never use acrylic snap-together inserts or greenboard. The entire shower is sealed with Schluter-KERDI bonded membrane and 24-hour flood tested before tile installation. Also serving Nichols Hills and Oklahoma City.

Schluter Waterproofing & Single-Piece Quartz Sills
Parsons Custom Bath and Shower — Custom Detail Preview

Keep the room layout or move the fixtures?

An Edmond bathroom project can replace a failing shower while leaving the vanity, toilet, and floor plan in place, or rebuild the entire room. Moving a drain or changing a tub opening adds different planning questions from replacing finishes in the same footprint. Share the existing layout and the changes you want so the estimate compares the right scope.

Keep the room layout or move the fixtures?
Parsons Custom Bath and Shower — Custom Detail Preview

Information to send before an Edmond site visit

Include your ZIP code, photographs, approximate room size, preferred timeline, and whether this is the household's only bathroom. Call out leaks, visible damage, and any interest in benches, niches, grab-bar backing, or a lower shower entry. Those details help frame the conversation before measurement and a written proposal.

Information to send before an Edmond site visit
Parsons Custom Bath and Shower — Custom Detail Preview

Frequently asked questions

Yes, Edmond is one of our primary service areas for custom walk-in tile showers, tub-to-shower conversions, and full studs-out bathroom remodels.
Why the Prep Matters

Why Oklahoma City
homeowners choose us

  • Schluter Certified Waterproofing
  • 24-Hour Pan Flood Testing
  • 2\" DWV High-Flow Plumbing Conversions
  • Laser-level layout checks & EJ171 joints
  • Single-piece solid quartz curb & niche caps
  • Owner on your job site every day
Primary Service RangeOklahoma City, Edmond, Nichols Hills & SW Oklahoma

Based in Choctaw, taking custom walk-in shower remodels, tub conversions, and studs-out bath renovations with zero subcontracted labor.

Before You HireRead the custom shower buyer guides

Compare costs, waterproofing systems, contractor scopes, timelines, curbless construction, and repair decisions.

Related Oklahoma City Remodeling Services

Explore Dedicated Service Areas & Project Calculators

Bathroom Project Estimate

Get a clear bathroom project estimate

Pick the bathroom size, finish level, structural changes, timeline, and ZIP code. Donnie uses the details to spot likely cost drivers before he puts a formal number on the work.

Upload photos or a competitor quote

Optional. Photos make the report more useful.

No files selected yet.

Estimated project range

$20,100 - $26,400

Estimate basis: $22,800

This is a preliminary project estimate, not a final bid. It uses your selected bathroom type, finish level, structural changes, timeline, and local ZIP context.

Budget fitLikely
MarketStandard
PhotosNo
Full Hall Bath$14,500

55 sq. ft. estimate size. Final measurements can move this up or down.

Convert Tub to Walk-In Shower$4,200

Remove tub or insert, rebuild the opening, plan slope, drain, waterproofing, and glass.

Waterproofing, prep, and finish repair$2,400

Allowance for behind-the-wall prep, membrane detail, drywall repair, trim, and finish touchups.

Field condition buffer$1,688

Allowance for hidden damage, access issues, framing correction, and site conditions.

Step 5: Send Your Estimate Request

Send the details to Donnie for a fit check. Qualified projects can move toward a site measurement; smaller cosmetic repairs still get a clearer expectation before anyone wastes time.

Let’s Discuss Your Bathroom Project

Share your project and contact info. If it looks like a fit, you’ll hear back to schedule a site visit at your project address in the Oklahoma City metro or Lawton.

(405) 455-9575Donnie@okcbath.comView our Google Business ProfileBased in Choctaw, serving the Oklahoma City metro and select southwest Oklahoma projects.Mon–Fri: 8am – 6pm
Used for calls about your project.